ACRONIS Backup & Recovery 10 Server, Windows Guide de l'utilisateur télécharger pdf (Page 171)

You can customize bootable media for any machine, and not only for the machine where the media

is created. To do so, configure the NICs according to their slot order on that machine: NIC1 occupies

the slot closest to the processor, NIC2 is in the next slot and so on. When the bootable agent starts

on that machine, it will find no NICs with known MAC addresses and will configure the NICs in the

same order as you did.

Example

The bootable agent could use one of the network adapters for communication with the management

console through the production network. Automatic configuration could be done for this connection.

Sizeable data for recovery could be transferred through the second NIC, included in the dedicated

backup network by means of static TCP/IP settings.

Network port

While creating bootable media, you have an option to pre-configure the network port that the

bootable agent listens for incoming connection. The choice is available between:

 the default port

 the currently used port

 the new port (enter the port number).

If the port has not been pre-configured, the agent uses the default port number (9876.) This port is

also used as default by the Acronis Backup & Recovery 10 Management Console.

Drivers for Universal Restore

While creating bootable media, you have an option to add Windows drivers to the media. The drivers

will be used by Universal Restore when recovering Windows on a machine with a dissimilar

processor, different motherboard or different mass storage device than in the backed up system.

You will be able to configure the Universal Restore:

 to search the media for the drivers that best fit the target hardware

 to get the mass-storage drivers that you explicitly specify from the media. This is necessary when

the target hardware has a specific mass storage controller (such as a SCSI, RAID, or Fiber Channel

adapter) for the hard disk.

For more information please refer to Universal Restore (p. 142).

The drivers will be placed in the visible Drivers folder on the bootable media. The drivers are not

loaded into the target machine RAM, therefore, the media must stay inserted or connected

throughout the Universal Restore operation.

Adding drivers to bootable media is available on the condition that:

1. The Acronis Backup & Recovery 10 Universal Restore add-on is installed on the machine where

the bootable media is created AND

2. You are creating a removable media or its ISO or detachable media, such as a flash drive. Drivers

cannot be uploaded on a PXE server or WDS/RIS.

The drivers can be added to the list only in groups, by adding the INF files or folders containing such

files. Selecting individual drivers from the INF files is not possible, but the media builder shows the

file content for your information.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 216 217

Pas de commentaire

ACRONIS Backup & Recovery 10 Server, Windows Guide de l'utilisateur Page 171